air shower room

[Product introduction]: The air shower is the channel required to enter the clean room, which can reduce the pollution problems caused by entering and leaving the clean room. The air shower is a highly versatile local purification equipment installed between the clean room and the non-clean room. When people and goods enter the clean area, they need to be blown through the air shower. The clean air blown out can remove the dust carried by people and goods, a

Description

product description

The AS-800-3/1 air shower is a highly versatile local purification equipment, installed at the partition wall between the clean room and the non-clean room, used for blowing people or objects into the clean area Dust removal. After use, it can effectively reduce the dust source entering the clean area and keep the clean area in normal working condition. Blowing method: single-sided blowing, double-sided blowing, three-sided blowing, top blowing.

working principle

The air in the AS-800-3/1 air shower room is forced into the static pressure box by the centrifugal fan through the primary air filter, and then filtered by the high-efficiency filter, the clean air is sprayed from the nozzle of the air shower room. The angle of the nozzle can be adjusted. , It can effectively blow off the dust attached to the surface of the human body or the carried items, and the blown dust will pass through the primary filter again with the circulating air flow, so as to achieve the purpose of wind showering.

Brief description of work process

The AS-800-3/1 air shower room is energized normally, and the touch screen enters the working state; manually open the entrance door, and at the same time, the exit door locks → the light is on → personnel enter the air shower room and close the entrance door → when the photoelectric sensor senses After the person, the air shower room automatically starts to air shower according to the set time (time is adjustable) → the door lock at the exit is automatically unlocked after the air shower is finished → the person opens the door at the exit to leave the air shower room.

Technical characteristics

The outer box can be made of all 304 stainless steel or steel plate paint

Photoelectric control, automatic blowing

Circulating air design to ensure the cleanliness of the air shower area in the non-blowing state

Double doors use electric interlocking forced showering, double doors can choose automatic sliding doors

Accept user's special design and customization, and can be made into negative pressure type and explosion-proof air shower room

Optional anti-static device

Undertake special design and production of air lock type and buffer type

The system can be switched between automatic and manual, and parameters such as blowing time can be set

Performance parameter

Material: outer box 304 stainless steel or steel plate paint, inner box 304 stainless steel

size: