PRODUCTS


+
  • undefined
  • undefined

mist shower room

In order to avoid high-pollution risk dust from polluting operators and the external environment, a fog shower room is set up at the exit of the workshop to safely handle high-risk dust attached to clothing and equipment to reduce or reduce the hazards of high-pollution dust.

Description

Overview

MIS series mist shower room is a new type of light controlled electronic interlocking automatic spray isolation and pollution prevention equipment, which is widely used in pharmaceutical, biochemical products, isolation wards and other production and medical departments. It is used to spray the dust on the human body to prevent it from being lifted up and protect the personnel and the external environment. After passing through, the personnel directly take off their coats and leave the production site to protect the operators from taking the dust harmful to the human body out of the clean room, and protect the personnel Protect the external environment. At the same time, the spray room also plays the role of air-cleaning, preventing the escape of untreated air harmful to human body and polluting the external environment, and is an effective isolation device for personal purification and preventing the outdoor air from being polluted.

 

Model description

 

technical parameter

1. Filter efficiency: ≥99.99%@0.3um

2. Air shower time: 0~9999s adjustable

3. Misting time: 0~9999s adjustable

4. Wind speed of nozzle: ≥25m/s

5. Water temperature: 35°C±3°C

6. Compressed air: 0.5~0.8MP

7. Power supply: 220V 50Hz

8. Maximum power consumption: 1. 2 KW

 

Product Features

1. The door is gas-filled and sealed, and double-door electronic interlock.
2. The tightness of the cabin shall reach OEB4 or above.
3. There are two levels of spray: emergency large capacity spray and general spray.
4. Integrated waterproof treatment inside.
5. Water temperature control, spray temperature automatic control.
6. Ventilation negative pressure design to protect the environment.
7. Sealing valve of fresh air and exhaust interface.
8. Configure BIBO safety filtration device.

 

Previous

Next

Previous

Next