• undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined

Y09-3056 (50L/min)Airborne particle counter

09-3056 airborne particle counter is a device for measuring particle dust with a sampling flow rate of 50LPM. As a particle count, real-time display of particle data of 0.3, 0.5, 1.0, 3.0, 5.0, 10μm 6 channels, and the option to switch to display the actual particle number or particle concentration value (1m3).


product description

HJ Clean Y09-3056 airborne particle counter (50L/min) is used to measure and analyze the size and quantity of dust particles in a unit volume of air in a clean environment, and is a testing instrument to determine the cleanliness level of the clean environment according to the standard.

airborne particle counters are widely used in clean workshop inspections in enterprises such as medicine and hygiene, optics, chemistry, food, cosmetics, electronics, biological products, aerospace and so on.


working principle

Particles in the air will scatter when irradiated by light. This phenomenon is called light scattering. Light scattering is related to factors such as particle size, light wave wavelength, particle refractive index, and light absorption characteristics of particles. But in terms of scattered light intensity and particle size, the dust particle counter has a basic law, that is, the intensity of scattered light from particles increases as the surface area of ​​the particles increases. In this way, as long as the intensity of the scattered light is measured, the size of the particles can be inferred, which is the basic principle of the light scattering particle counter.

Brief description of work process

Set the sampling period to 1 minute, the number of samples per point is 3, the number of room sampling points is 4, and the room sampling address is defined as 1. Connect the sampling port of the instrument and the constant velocity sampling head with a hose, and fix the sampling head to the measurement position of the first point. Press the start button to start the measurement. After 1 minute, the first set of data of the first point will be printed out, and the measurement will continue until it is printed. For the third set of data, the instrument automatically stops sampling; the dust particle counter then moves the constant velocity sampling head to the second measurement position, and finishes measuring the second point of data in the same way, until the 4 measurement points are all measured, the instrument automatically prints out The UCL data of the room is used as the basis for judging the cleanliness level of the room.


Technical characteristics

50 liters/min sampling volume

Large Flow!

Built-in delay test time

6 particle size channels: 0.3, 0.5, 1.0, 3.0, 5.0, 10μm

New hardware upgrade and revision mute! Low vibration!

Real-time data printing, large storage capacity: 60,000 groups of data can be stored

Built-in large-capacity lithium battery, can be used continuously for more than 8 hours

Three-level password management


Performance parameter

Particle counting channels: 0.3, 0.5, 1.0, 3.0, 5.0, 10μm six channels

Counting range: 35000 pcs/L

Sampling period: 1 second -99 minutes and 99 seconds

Sampling delay: 0-9 seconds

Sampling frequency: 1 second -99 hours

Sampling flow: 50L/min imported sampling pump

Confidence level (UCL): 0.5, 5.0μm UCL

Alarm setting: any value setting of 0.3, 0.5, 1.0, 5.0 channels

Data storage: 60000 groups/USB

Self-cleaning time: ≤10min

Accuracy: ±10% aerosol

Light source: semiconductor laser (lifetime greater than 30000 hours)

Power supply: 14.8V lithium battery

Communication: DB9, USB data export

Display: 800X480 resolution 65K color touch screen touch/display

Size: 210*270*280 (width * depth * height)

Mass: 7.5kg

Password management: three-level password