





All categories 



Safety Isolation Equipment

Negative pressure isolator

BIBO Bag in bag out filter

Sterility test isolator

Isolated protective cabin

BSC-Πclean biological safety cabinet

cell culture isolator

Disinfection And Sterilization Equipment

Hydrogen peroxide sterilizer

AD series atomization disinfection machine

Lead clothing disinfection

Air Purification Equipment

dispensing booth/sampling booth

Air shower

Mist room

pass box

Clean bench

Laminar flow hood

Clean mobile vehicle

Air purification and disinfection machine

Clean Stoker

Fume Hood

FFU

Testing Equipment

Airborne particle counter

Online suspended particle detection system

Dust detector

Microbial Air Sampler

Air flow hood

Filter material efficiency detector

photometer

Glove Integrity Tester

Environmental parameter detector

Aerosol generator

Number of views:

1000

Y09-SS

Y09-SS type/5102 online laser dust particle counter is used to measure the size and number of dust particles per unit volume of air in a clean environment, and transmit the corresponding particle number to the host computer through MODBUS485 communication. It can control the clean environment with cleanliness level of 100,000 to 100. This instrument uses imported semiconductor laser light source, small size, light weight, high detection accuracy, computer control, as long as the instrument is powered on, it can automatically output data without personnel operation. Therefore, it is very convenient to test a clean environment. It is widely used in electronics, optics, chemistry, food, cosmetics, medicine and health, biological products, aerospace and other sectors.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

Category

Online suspended particle detection system

Quantity

Stock:



Description

Introduction to Counter Application

This instrument uses imported semiconductor laser light source, small size, light weight, high detection accuracy, computer control, as long as the instrument is powered on, it can automatically output data without personnel operation. Therefore, it is very convenient to test a clean environment. It is widely used in electronics, optics, chemistry, food, cosmetics, medicine and health, biological products, aerospace and other sectors.

The main technical parameters

1. Dimensions 　　　 ø80*160mm; 140*100*45

2. Mass 　　　　 about 0.6kg

3. Maximum power consumption　　　 2VA

4. Power supply　　　 external 7.4-12VDC/1A

5. Standard signal particle size channel 　0.3-5μm optional 2, standard 0.5, 5μm

6. Sampling flow 　 28.3LPM

7. Sampling period 1 minute

8. Use environmental conditions 　 Temperature: 0℃-40℃ 　　　　　　　　 Humidity: 20%-75% ambient pressure and sampled gas pressure: 86kPa-106kPa

9. The maximum allowable sampling concentration is 　35000 particles/L (the particle size of dust particles is not greater than 0.5μm), and the sampling air must not contain corrosive gases such as acid and alkali

10. Self-cleaning time　　　　≤10min

working principle

This instrument uses the principle of light scattering. When suspended particles in the air pass through the photosensitive area, they scatter light flux in proportion to their particle size. After photoelectric conversion, amplification and processing, the equivalent diameter and number of collected particles are obtained and the number of particles is passed through MODBUS485 transmission

Install

Know the counter before installation, as shown in the figure below. It is composed of protective cover, isokinetic sampling port, entity, electrical connection plug, sampling hose, ø32 stainless steel tube, quick connector, etc.