AS-800A automatic sliding door air shower channel

product description

The AS-800A automatic sliding door air shower channel is a blowing and dust removal channel for the entry and exit of goods and people. It is installed at the partition wall between the clean room and the non-clean room for blowing people or objects into the clean area. Drain the dust. After use, it can effectively reduce the dust source entering the clean area and keep the clean area in normal working condition.

working principle

The air in the AS-800A automatic sliding door air shower channel is pressed into the static pressure box by the centrifugal fan through the primary air filter, and then filtered by the high-efficiency filter, the clean air is sprayed from the nozzle of the air shower room at high speed, and the nozzle angle can be adjusted. , It can effectively blow off the dust attached to the surface of the human body or the carried items, and the blown dust will pass through the primary filter again with the circulating air flow, so as to achieve the purpose of wind showering.

Brief description of work process

The AS-800A automatic sliding door air shower channel is energized normally, and the touch screen enters the working state; manually open the entrance door, and the exit door locks at the same time → the light is on → the person enters the air shower room, close the entrance door → when the photoelectric sensor senses the person , The air shower room automatically starts to air shower according to the set time (time is adjustable) → the door lock at the exit is automatically unlocked after the air shower is finished → the personnel open the door at the exit to leave the air shower room.

Technical characteristics

Optional full 304 stainless steel or steel plate paint material

Photoelectric control, automatic blowing

Circulating air design to ensure the cleanliness of the air shower area in the non-blowing state

Automatic sliding door adopts electric interlocking forced blowing

The control system has an intuitive introduction, and two modes of automatic control and manual control are optional.

Optional anti-static device

Undertake special design and production of air lock type and buffer type

Parameters such as blowing time can be set

Performance parameter

Material: optional stainless steel or steel plate paint

Size: customized according to customer requirements

Spraying wind speed: ≥25m/s

Number of nozzles: customized

Power consumption: customized

Quality: customized

Filtration efficiency: ≥99.99%@0.3μm

Power supply: AC, 3N, 380V±10%, 50Hz±2Hz